News Releases

Related Document

    Vancouver, British Columbia - TerraX Minerals Inc. (TSX.V: TXR; Frankfurt: TX0) is pleased to report further high grade gold assay results from drill core re-logged and re-sampled from its Northbelt property in the Yellowknife gold camp, Northwest Territories. These 22 holes reported today had been drilled at the Central Shoot and the South Shoot of the Crestaurum deposit, one of numerous gold occurrences on the Northbelt property, and have intercepted high-grade gold near surface in several holes. Highlights include:

    Central Shoot

    • 20.66 g/t Au over 5.00 meters in hole 85-187
    • 12.79 g/t Au over 3.00 meters in hole 85-181

    South Shoot

    • 12.43 g/t Au over 5.00 meters in hole 85-173
    • 8.03 g/t Au over 5.00 meters in hole 85-174

    TerraX is currently analyzing core from more than 175 drill holes previously stored in the core yard at the Giant Mine site in Yellowknife (see news release of July 22, 2013), the assay results from the majority of which have never been reported by prior operators. This historical core included mineralized portions of 74 holes from the Crestaurum deposit that were drilled in 1985 by Giant Mines Ltd to assist them in open pit and underground planning on the Crestaurum deposit. Due to it's high grade (see September 18, 2013 release of 13.07 g/t Au over 6.87 m from drill hole 85-118 and 67.69 g/t over 2.00 m from drill hole 85-157 on this deposit), Crestaurum received the vast majority of the historical exploration attention by Giant Mines, including in-fill drilling, advanced mine planning and metallurgical testing. Although already well-defined as a potential resource, the Crestaurum is considered a smaller target than several other shears zones on Northbelt, including the much larger Barney Shear system (see drill hole NB95-16 reported August 14, 2013 ).

    The results being reported here are for 22 holes in and near the 'Central Shoot' and the 'South Shoot', areas of higher grade mineralization on the Crestaurum shear that were drilled in 1985. The Central Shoot is 150 m south of the 36 drill intersections reported from the North Shoot on September 18, 2013. The South Shoot is a further 300 m southwest of the Central Shoot and is the most southerly area previously drilled on the Crestaurum shear. As previously reported, the free milling nature of the Crestaurum mineralization, as determined by metallurgical testing in 1988, was not conducive to processing in the refractory roaster utilized at the nearby Giant Mine, and thus the deposit was never developed.

    In June of this year TerraX located 123 drill collars at Crestaurum and had the locations surveyed. This included almost all of the 74 holes drilled in 1985, making the discovered drill core from these 74 holes a high priority choice to be re-logged and re-sampled. The core recovered from these 74 holes included most of the mineralized drill core intervals (exceptions noted in table below). Core distances were converted from the original imperial measurements (feet) to metric (meters), and then it was subjected to geological re-logging. New core sampling intervals were designated from the metric measurements based on observed mineralization, but by and large consisted of standard 1 meter sample intervals. Compared to the size of other shears on the property, the logging revealed a relatively narrow zone of alteration (siliceous, carbonate, sericitic, +/- chlorite) and shearing with many holes displaying quartz veining and mineralization (pyrite, arsenopyrite, galena, sphalerite, chalcopyrite and stibnite). Several drill holes displayed visible gold as fine grained aggregates or millimeter scale grains, generally within quartz, but occasionally seen in sheared host rock.

    TerraX believes these assay results provide further confirmation of this important zone of mineralization at Crestaurum, which remains open in all directions and down dip. All holes from the Central Shoot and the South Shoot areas are listed below and are categorized into "Inside Shoot" and "Outside Shoot" based on interpretations of the zones done by Giant Mines in 1988. The table includes comment on issues concerning a few holes with missing core in the mineralized zones, and comment on spatial location of holes outside the shoot. It should be noted that drill holes outside the shoot remain significantly mineralized, and TerraX will continue to assess results by modeling the entire Crestaurum mineralized zone for future exploration.

    Assay Intervals from Crestaurum

    Inside Central Shoot
    Drill HoleFROM
    DDH85-18556.6063.006.401.14Zone bifurcates into two lenses
    Outside Central Shoot
    DDH85-18394.0096.002.000.71South of Central Shoot
    DDH85-189Core from mineralized interval lostNorth of Central Shoot
    DDH85-149Core from mineralized interval lostNorth of Central Shoot
    DDH85-152152.10153.000.902.63North of Central Shoot, partially missing mineralized zone core
    Inside South Shoot
    DDH85-18051.0063.0013.001.23Zone bifurcates into two lenses
    and incl.61.0063.002.003.85
    DDH85-19066.0067.291.295.96Zone bifurcates into two lenses
    Outside South Shoot
    DDH85-17058.0060.002.230.75North of South Shoot
    DDH85-18272.0079.007.000.52South of South Shoot
    DDH85-184118.87121.002.131.38Below Plunge
    DDH85-188114.91122.004.890.16Missing 2.1 meters of core from centre of mineralization

    Orientation of the Crestaurum Zone is well defined by 187 drill holes (average 035º strike and average 50º dip), and therefore it is confidently known that the drill intersections are close to true thickness, ranging from 85%-100% true width.

    TerraX collected 319 samples for assay from the drilling in the Central Shoot and South Shoot areas. Individual assay results ranged from below detection to a high of 85.6 g/t Au. Best results were obtained in areas of good quartz veining. Core samples were cut with a diamond saw blade. Sampling generally was done by quarter core sampling of half sawn core that remained from previous sampling in 1985, although TerraX sampled all of the core that was available, and extended its sampling beyond the previous sample limits. In areas of previous sampling, quarter core samples remain in the core boxes for further examination if required. Newly sampled areas have one half core remaining.

    The shear structure containing the Crestaurum mineralization has been drilled for 1400 m of strike length, but the deepest known intersection into the mineralization is less than 150 m vertical depth. The deposit is interpreted to extend further north than the North Extension based on widely spaced drilling with significant gold grades. It has almost no drilling to the south of the South Shoot. The deposit therefore remains open in all directions.

    TerraX has re-logged and re-sampled mineralized core intervals from 16 more holes drilled in 1985 by Giant Mines on the Crestaurum deposit. These include holes from the North Extension Shoot area. Results of these holes will be released as soon as possible once they are input into the drill data base.

    Core sampling included insertion of certified standards and blanks. Samples were prepared at ALS Chemex's laboratory in Yellowknife and shipped to their Vancouver facility for gold and ICP analysis. ALS is a certified and accredited laboratory service.

    The technical information contained in this news release has been approved by Joseph Campbell, the President of TerraX, who is a Qualified Person as defined in "National Instrument 43-101, Standards of Disclosure for Mineral Projects."

    The Northbelt gold property encompasses 3,562 hectares on the prolific Yellowknife belt, 15 km north of the city of Yellowknife, and covers 13 km of strike on the northern extension of the geology that contained the Giant (7.6 Moz) and Con (5.5 Moz) gold mines. The Northbelt property is host to multiple shears that are the recognized hosts for gold deposits in the Yellowknife camp and it contains innumerable gold showings.

    On behalf of the Board of Directors


    Joseph Campbell

    Contact: Paradox Public Relations
    Phone: 514-341-0408
    Toll Free: 1-866-460-0408


    Contact: Vanguard Shareholder Solutions
    Phone: 604-608-0824
    Toll Free: 1-866-801-0779

    Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

    This news release contains forward-looking information, which involves known and unknown risks, uncertainties and other factors that may cause actual events to differ materially from current expectation. Important factors - including the availability of funds, the results of financing efforts, the completion of due diligence and the results of exploration activities - that could cause actual results to differ materially from the Company's expectations are disclosed in the Company's documents filed from time to time on SEDAR (see Readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date of this press release. The company disclaims any intention or obligation, except to the extent required by law, to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise.

    © 2019 TerraX Minerals Inc.
    All rights reserved.

    Subscribe to our Email List